Radwag PMV50 Mikrowellen-Feuchtebestimmer, Auflösung 0,1mg - Feuchtebestimmershop
Radwag PMV50 PLUS Mikrowellen-Feuchtebestimmer, Auflösung 0,1mg - Feuchtebestimmershop
Radwag PMV50 PLUS Mikrowellen-Feuchtebestimmer, Auflösung 0,1mg - Feuchtebestimmershop
Radwag PMV50 PLUS Mikrowellen-Feuchtebestimmer, Auflösung 0,1mg - Feuchtebestimmershop

Radwag PMV50 PLUS Mikrowellen-Feuchtebestimmer, Auflösung 0,1mg

Normaler Preis
€13.645,00
Sonderpreis
€13.645,00

PMV 50 PLUS moisture analyzer is an advanced solution for measurement of moisture content of samples containing significant amount of moisture (up to 100%). The drying process is carried out by means of microwaves which enable to evenly heat the whole sample's volume. The PMV 50 PLUS, when compared to standard moisture analyzers, significantly shortens the drying time.
The PMV 50 PLUS microwave moisture analyzer can be successfully used wherever materials containing large amounts of water are dried, for example: dairy products, fish, meat, fruit products, syrups, creams, liquid resin.

The sample is placed in the drying chamber on a glass fibre filter. At the bottom of the chamber there is one end of the waveguide from where the microwaves are emitted. Upon process start, microwaves are equally distributed on the filter's surface and dry the sample. The moisture content is determined on the basis of the mass loss obtained during drying.

A respective drying program is selected depending on sample mass and its chemical composition. The average duration of this process depends on the type and mass of used substance, and takes 1 to 10 minutes. In contrast, drying using the traditional halogen moisture analyzer takes 5 to 40 minutes.

The PMV 50 PLUS microwave moisture analyzer is equipped with a temperature sensor and enables to monitor device power in order to prevent exceeding the boiling point during the process. A preset microwave power is displayed on the indicator throughout the drying procedure.
 
Features:
  • Intended for drying of samples containing significant amount of moisture (up to 100%)
  • Ultra-short drying time when compared to traditional moisture analyzers and standard drying methods
  • Microwave-based solution
  • Uniform heating of entire sample's surface
  • Complex database of drying programs
  • Finish mode: manual, automatic, time-defined, user-defined
  • Advanced reports, time and statistical graphs
  • Easy operation due to a touch screen
The PMV 50 PLUS moisture analyzer is based on an advanced-class Y series system intended for laboratory balances. Expanded 16 GB memory enables saving and storing sophisticated reports and time and statistical graphs. Wireless communication improves ergonomics and operation safety. Wi-Fi® enables sending data between the moisture analyzer and a mobile device. Large 5.7’’ touch screen guarantees comfort of operation. Proximity sensors ensure touch-free access to user-specified operations.

For each purchase of the PMV 50 moisture analyzer the customer is supplied with:
  • 60 glass fibre filters of ø 90 mm,
  • a sample of sodium chloride 10% ±0,5% to determine correctness of the operation at the workstation,
  • a service concerning determination of drying parameters for five customer-selected samples carried out by RADWAG employee.
The results obtained using the moisture analyzer (the final result of the drying process):
  • % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage,
  • % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated,
  • % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process,
  • g – the sample mass after drying.
* All trademarks and registered trademarks are the property of their respective owners.
    Wägebereich [Max]

    50 g

    Ziffernschritt [d]

    0,1 mg

    Tarierbereich

    -50 g

    Justierung

    extern 

    Display

    5,7” resistiv farbiger Touchscreen 

    Schnittstelle

    RS232, 2×USB-A, Ethernet, 4 IN / 4 OUT digital), Wi-Fi®

    Stromversorgung

    100 ÷ 240 V AC 50 / 60 Hz 

    Umgebungstemperatur

    +10 ÷ +40 °C

    Max. Probegewicht

    50 g

    Heizelement

    Mikrowellenemitter 

    Leistungsaufnahme Heizelement

    800 W 

    Ziffernschritt (Feuchtigkeit)

    0,05% 

    Optionen Trocknungsabschaltung

    4 Modus (zeitlich, definierbar, automatisch, manuell) 

    Waageschale

    Glasfaser Filter ø 90 mm 

    Wi-Fi® ist eine eingetragene Marke der Wi-Fi® Alliance.